Senior Technology Analyst, Japanese Equities, LightStream Research

Scott Foster

Senior Technology Analyst, Japanese Equities

Long-Short Analysis on Japan, Asia and the World

LightStream Research

LightStream conducts quantitatively rigorous and data-driven analysis with a focus on Japan and Asia.

We consistently cover the Tech, Consumer and Industrial sectors, and provide ECM and Events coverage more broadly.

We supplement traditional qualitative insights from company relationships with a robust quantitative foundation that examines as much historical data as is available.
We further refine the accuracy of our insights and calls through the use of alternative data to flesh out current trends, and through a valuation framework that emphasises non-superficial peer group selection and a proper attempt to understand the metrics and changes that have driven security valuations in the past.

Equity Bottom-Up

<ul>
<li>The outlook for factory automation is improving with inventory clearance, the upturn in the semiconductor industry and an AI-enhanced response to the labor shortage.</li>
<li>Yaskawa's margins should continue to rise with renewed growth in Robotics, efficiency gains and an upgraded product line. </li>
<li>Valuation stretched at 30x EPS guidance for FY Feb-25, but current weakness looks like a long term buying opportunity.</li>
</ul>


The outlook for factory automation is improving with inventory clearance, the upturn in the semiconductor industry and an AI-enhanced response to the labor shortage.
Yaskawa's margins should continue to rise with renewed growth in Robotics, efficiency gains and an upgraded product line. 
Valuation stretched at 30x EPS guidance for FY Feb-25, but current weakness looks like a long term buying opportunity.


Yaskawa (6506 JP): Start of a New Factory Automation Growth Cycle

APAC IPOs & Placements, Aequitas Research

Ethan Aw

APAC IPOs & Placements

IPOs and Placements coverage across Asia Pacific

Aequitas Research

We cover all listing across the Asia Pacific along with follow-up placements. As of Dec 2020, our team had covered 539 IPOs with a hit rate of 73.5% and 685 placements with a hit rate of 66.8%.

We combine fundamental bottom-up views with our proprietary quantitative framework to provide a holistic coverage across new listings and placements. Our coverage includes pre-IPO notes before the deal is launched, follow-up analysis once the deal is live and post-listing trading analysis as well.

Equity Capital Markets

Doosan Robotics  / Equity Capital Markets

<ul>
<li>
<a href="https://www.smartkarma.com/entities/doosan-robotics" target="_blank" data-smartkarma-citation="entities:36816:1" rel="noopener">Doosan Robotics (DOOSANROBO KS)</a> is looking to raise up to US$314m in its Korean IPO. </li>
<li>Doosan Robotics (DR) manufactures and sells collaborative robots (Cobots). The firm’s product portfolio primarily includes different series of robot arms as well as its coffee module. </li>
<li>In our previous notes, we looked at the company’s past performance and undertook a peer comparison. In this note, we talk about valuation.</li>
</ul>



Doosan Robotics (DOOSANROBO KS) is looking to raise up to US$314m in its Korean IPO. 
Doosan Robotics (DR) manufactures and sells collaborative robots (Cobots). The firm’s product portfolio primarily includes different series of robot arms as well as its coffee module. 
In our previous notes, we looked at the company’s past performance and undertook a peer comparison. In this note, we talk about valuation.


Doosan Robotics IPO - Thoughts on Valuation - A Punt at Best, a Crash at Worst

Japan Specialist

Mark Chadwick

<ul>
<li>We are bearish on Fanuc. Yaskawa's robotics orders were strong but Fanuc is more correlated with machine tool orders</li>
<li>Machine Tool orders have already turned south and Fanuc is losing momentum in its order growth</li>
<li>If we are right on the cycle, we expect Fanuc to trade down to 2.3x book value, 20% downside risk from here</li>
</ul>


We are bearish on Fanuc. Yaskawa's robotics orders were strong but Fanuc is more correlated with machine tool orders
Machine Tool orders have already turned south and Fanuc is losing momentum in its order growth
If we are right on the cycle, we expect Fanuc to trade down to 2.3x book value, 20% downside risk from here


Fanuc (6954) - Forget Yaskawa...a Slowdown Is Coming

IPOs and Catalysts/Events, Global Equity Research Ltd

Arun George

IPOs and Catalysts/Events

Uncompromised, Independent, Conflict-Free Research

Global Equity Research Ltd

Global Equity Research was started in 2017 by a group of experienced research professionals. It was founded on a passionate belief in the importance and the need for uncompromised, independent, conflict-free research. We aim to provide differentiated and actionable primary and bottom up fundamental research.

Event-Driven

<ul>
<li>The <a href="https://www.smartkarma.com/entities/makino-milling-machine-co" target="_blank" data-smartkarma-citation="entities:5200:1" rel="noopener">Makino Milling Machine Co (6135 JP)</a> Board has proposed introducing countermeasures to nudge <a href="https://www.smartkarma.com/entities/nidec-corp" target="_blank" data-smartkarma-citation="entities:7245:1" rel="noopener">Nidec Corp (6594 JP)</a> to delay the start of the tender to 9 May. </li>
<li>The countermeasure was likely needed to facilitate a competing offer rather than force Nidec to provide the required information and delay the start (Nidec is still evaluating the request).</li>
<li>Nidec’s offer at current terms has a low chance of success, necessitating revised terms. The Board claims that there is a sufficient probability of a competing proposal.</li>
</ul>


The Makino Milling Machine Co (6135 JP) Board has proposed introducing countermeasures to nudge Nidec Corp (6594 JP) to delay the start of the tender to 9 May. 
The countermeasure was likely needed to facilitate a competing offer rather than force Nidec to provide the required information and delay the start (Nidec is still evaluating the request).
Nidec’s offer at current terms has a low chance of success, necessitating revised terms. The Board claims that there is a sufficient probability of a competing proposal.


Makino Milling Machine (6135 JP): Proposes Countermeasures

<ul>
<li>
<a href="https://www.smartkarma.com/entities/makino-milling-machine-co" target="_blank" data-smartkarma-citation="entities:5200:1" rel="noopener">Makino Milling Machine Co (6135 JP)</a> has disclosed that it has received initial letters of intent from multiple third parties, reportedly private equity funds, to launch a competing tender offer.</li>
<li>My analysis suggests that a white knight bid could be as high as JPY13,284, 20.8% higher than Nidec’s JPY11,000 offer and 10.2% higher than the last close price of JPY12,050.</li>
<li>
<a href="https://www.smartkarma.com/entities/nidec-corp" target="_blank" data-smartkarma-citation="entities:7245:1" rel="noopener">Nidec Corp (6594 JP)</a> will take a wait-and-see approach. However, regardless of whether a white knight bidder emerges, Nidec will eventually have to bump.</li>
</ul>



Makino Milling Machine Co (6135 JP) has disclosed that it has received initial letters of intent from multiple third parties, reportedly private equity funds, to launch a competing tender offer.
My analysis suggests that a white knight bid could be as high as JPY13,284, 20.8% higher than Nidec’s JPY11,000 offer and 10.2% higher than the last close price of JPY12,050.

Nidec Corp (6594 JP) will take a wait-and-see approach. However, regardless of whether a white knight bidder emerges, Nidec will eventually have to bump.


Makino Milling Machine (6135 JP): A White Knight Bidder Is Emerging

Japan

YASKAWA Electric Corporation manufactures and markets servomotors, controllers, inverters, and industrial robots.  The Company's products include spindle controllers, computerized numerical control (CNC) systems, and system engineering.

Price Gauge
52-week Range	0.00 - 0.00
Market Cap (USDm)	0.00
P/E	0.00
Dividend (Yield)	0.00

Yaskawa Electric (6506 JP)

Yaskawa (6506 JP): Start of a New Factory Automation Growth Cycle

Long-term buy with share price down 10% in the past month as orders bottom out. Robotics looking up with inventory cleared and need for automation...

Scott Foster

Doosan Robotics IPO - Thoughts on Valuation - A Punt at Best, a Crash at Worst

Doosan Robotics (DOOSANROBO KS) is looking to raise up to US$314m in its Korean IPO. comparison. In this note, we talk about valuation.

Ethan Aw

Fanuc (6954) - Forget Yaskawa...a Slowdown Is Coming

The market should ignore the positive read-across from Yaskawa results. Fanuc is more correlated with machine tool orders. We see signs of a...

Mark Chadwick

Makino Milling Machine (6135 JP): Proposes Countermeasures

The Board proposes countermeasures to get Nidec to delay the start but is more likely to facilitate a competing offer. The probability of a bidding...

Arun George

Makino Milling Machine (6135 JP): A White Knight Bidder Is Emerging

My analysis suggests that a white knight bid could be as high as JPY13,284, 20.8% higher than Nidec’s JPY11,000 offer and 10.2% higher than the...

Arun George

Price Gauge

52-week Range

Market Cap (USDm)

P/E

Dividend (Yield)